Transferring your License to Another Computer

(see also: Managing your Flexi License)

 

Step-by-Step instructions for transferring your license. Make sure you have an active connection to the internet. A downloadable version of this document can be found at the end of this article.

Step 1: Remove your license

  1. Locate your license manager on your old computer:
    • There are several ways to locate your License Manager. We recommend putting a shortcut to it on your desktop once you find it (Right click -> Create Shortcut). Do one of the following:

      • In your Windows Search bar or Start Menu, type in License Manager. The Windows search function should be able to find it.
        mceclip0.png

      • Navigate to one of the following installation folders depending on your version. Your License Manager will be located in this folder towards the bottom.
        • Flexi 21 or Later: C:\Program Files\SAi\SAi Production Suite XX
        • Flexi 21 HP Edition: C:\Program Files\SAi\Flexi HP Edition XX
        • Flexi 19 or earlier: C:\Program Files (x86)\SAi\SAi Production Suite XX
        • Flexi 19 HP Edition or earlier: C:\Program Files (x86)\SAi\Flexi HP Edition XX
        • Flexi Mutoh Edition: C:\Program Files (x86)\Mutoh\FlexiPRINT&CUT Mutoh Edition

      • If you have a shortcut to Flexi on your desktop, right click it and then click Open File Location. You will need to go one folder up.
  2. Click Remove License From this Computer:
    mceclip0.png

Step 2: License your new computer

  1. Install Flexi on your new computer. While installing, the License Manager will open.

    If Flexi is already installed, locate your license manager again by using the steps above.

  2. Enter your Activation code. This is always found on your account at saicloud.com. On a success, license manager will now display your information. Verify your expiration date is not in the past. The format is DD-MM-YYYY.
    mceclip3.png      mceclip6.png
Was this article helpful?
4 out of 17 found this helpful

Comments

0 comments

Article is closed for comments.